CCS Pattern Stamped Concrete

WoodPanelStampedTexture and Application

Pattern (stamped) Concrete provides a relatively smooth finish depending on the stamping mould or roller used.

It is critical that sufficient quantities of CCS Colour Hardener are applied to the concrete to ensure a durable finish is achieved.

The correct ratio of CCS Colour Hardener depends on  the service conditions the floor will be exposed to. Recommended application rates are:-

Domestic driveways, paths and car parks with vehicular traffic less than 3 tonnes.

 2-2.8kg of Colour Hardener per sq. metre (7-10 sq. metres per 20kg bag).
Public roadways and industrial hard stands.

 3.3kg of Colour Hardener per sq. metre (6m sq. metres per 20kg bag).
Busy shopping footpaths and malls with heavy pedestrian traffic. 4kg of Colour Hardener per sq. metre (5 sq. metres per 20kg bag).

 

Suggested Specification for Pattern (Stamped) Concrete


Option 1 - Using CCS Colour Hardener to create base colour: 

  1. The concrete should be coloured with CCS (nominate colour) ______ Colour Hardener at a rate of one 20kg bag per 7 to 10 square metres.
  2. CCS (nominate colour) ______ Release Agent should be applied to all concrete surfaces to be imprinted with (nominate design) ______ Textured Mat or Roller.
  3. After 3 days, wash off excess release agent.
  4. Once dry, the slab should be sealed with 2 coats of CCS Hardseal acrylic sealer.
    5.  

Option 2 - Using CCS Pigment Concentrates to create base colour:

  1. Concrete is to be integrally coloured with CCS (nominate colour eg. CCS Onyx) ______ Pigment Concentrate as manufactured by Concrete Colour Systems (refer to contact details at bottom of page). One pre-formulated bag should be added per one cubic metre of (nominate strength) ______ MPa concrete containing (i.e. "grey" or "off white") ______ cement.
  2. CCS (nominate colour) ______ Release Agent should be applied to all concrete surfaces to be imprinted with (nominate design) ______ Textured Mat.
  3. After 3 days, wash off excess release agent.
  4. Once dry, the slab should be sealed with 2 coats of CCS Hardseal acrylic sealer.